Your kitchen sink drain pipe could be leaking, and it's really frustrating. Kitchen sinks drainpipe is used to drain the water out of your kitchen sink. You can usually see where it's leaking. There are several things that you can do to stop it from leaking.
Leaked compression
Your kitchen sink leaks because the worn compression nut has leaked. This might sound odd, but just because your compression nut hasn't leaks doesn't mean it's not the problem. If you can have a good tight clean cut with a cutter, then a faucet insert, or kitchen sink drain tap that uses a seal washer, could fix this for a while. However, it usually s leaking where the pipe meets the wall.
Your kitchen sink pipes are most likely copper drain pipes, and they're probably brass too. The problem that you have is the brass has rusted through the copper. You can make your copper sink pipes like new again by following some simple steps. You need to identify the compression nut that has rusted through. You can easily do this by unzipping the end of a long skinny plastic hose.
You then unzip the other end of the tape and expose the compression nut. You'll then be able to look inside the pipe for a level 2 mark, also known as an air cut. The next step is to remove the rusted connection that you see in the drain pipes. You need to use a screwdriver to remove the old connection (the rusted round part) and then you'll be left with a level 1 mark.
Locate the P-Trap
The next step is to locate the p-trap. You should have something called a philips head wrench to do this. You then take the connection off of the drain pipe and attach the new one on the opposite side. You'll need to re-tighten the compression nut on the other end.
The last step is to replace the connection to the p-trap. You should replace it by reversing the plumbing process. This will ensure that you don't have any more leaks and it'll save you a lot of time.
If you follow these tips you'll definitely have a leak-free home and you'll be able to avoid wasting money on repairs. The best part about these tips is that you only need them if you're experiencing problems with your kitchen sink plumbing. In case you don't have these tips, you might want to call a professional to help you and spend some more money on expensive repairs.
Safety first
Remember to protect yourself as well as your family. You should always make sure that you have a good foundation and that the pipes around it are doing their job. If you have a leaky pipe, you can't expect your fridge to work properly or your washing machine to do its job. The kitchen sink drainage system is very important to any household. This is why there's a special set of skills needed to repair them. By following these tips, you won't have any more problems with your plumbing.
Drain pipes are designed to trap solids and liquids and prevent them from draining out. To make sure that these pipes are doing their job, they need to be tightly secured with a slip joint or an internal spiral lock. However, sometimes these pipes can get loosened because of age, grease build-up or loose compression nuts. If this happens to your kitchen sink drain pipes, you can try tightening the bolts using a wrench, but remember to use the correct sized nuts.
The most common cause of these problems is rust build-up. If you regularly drain your sink, you can easily notice if there's a buildup of rust on the inner part of the pipes. For cast iron pipes, this happens because of the constant heating that the material experiences. In fact, cast iron was used in cast iron buildings until the 19th century. Over time, the pipes begin to lose their rigidity and this causes rust to form. Other materials that can cause this include vinyl, polyvinyl chloride (PVC) and cast aluminum.
Check drainage pipe
The next thing that you should check is your sink drainage pipe. If it's not leaking, then the problem may lie elsewhere. You should also check for any signs of excess build-up of sludge in your drainage pipe. Sludge can cause your sewer system to clog and ultimately lead to sinks that leak. To determine whether your sink is leaking, you can use the same technique that you use to check the other pipes. Just put a drainpipes prolapse test tube into one of the pipes that you're checking, then insert some water and watch it to see how it works.
